Many of the friends who purchased the Vickers vane pump after the long-term operation must pay attention to some matters, such as how to prevent the oil from the Vickers vane pump hydraulic tank? First of all, the hydraulic oil is reduced without knowing it? How did it disappear? How to effectively prevent the occurrence of the oil slick phenomenon in the Vickers vane pump hydraulic tank?
1. The air filter normally installed on the hydraulic fuel tank of the Vickers vane pump is also used as the liquid oil port. When the machine runs on a bumpy road or when the hydraulic cylinder is rapidly recirculating, the oil is easier to get from the air filter. Pull out.
2, this has not only caused waste, but also caused pollution to the environment. Although the fuel tank partition can prevent the fluctuation of the oil to a certain extent, it is difficult to completely avoid the occurrence of oil sputum.
3, after the improvement, an anti-smashing sleeve is added before the improvement. The sleeve is higher than the upper plane of the oil tank and welded with the oil tank; on the sleeve inside the fuel tank, many small holes are punched.
4, in this way, not only can the simmering oil caused by oil fluctuations be eliminated, but also the oyster sauce caused by the foam produced after the air is mixed into the system can be well prevented.
5. The improved device effectively avoids the overflow of excess oil, reduces the loss, and does not adversely affect the equipment engineering.